Skill level: Beginner Approx. time: 20 mins You will need: Small square card - blue Silver Magicmesh (Available from Lakeland Limited) Silver Linen textured card scrap Blue card scrap Silver ink pad Star embossing template Dry embossing equipment Sticky foam pads strong glue

Step 1: Using the light box and star template, dry emboss the pattern onto the blue card scrap and cut around into a small square.

Step 2: Lightly rub the silver ink pad over the raised image to highlight the image and leave to dry.

Step 3: Cut the silver card slightly bigger than the blue piece and mount the blue onto the silver using a strong glue.

Step 4: Cut the Magicmesh to half the size of the card front and stick down the left hand side of the card (it is self adhesive). Trim any excess.

Step 5: Stick the star onto the card at an angle as shown, with sticky foam pads.