Card Design Projects
Fathers Day Card

Skill level: Beginner Approx. time: 20 -25 minutes You will need: White textured card Red mulberry paper Paint brush and a little water Black sparkly card Two Ace cards from small kids pack Silver ‘Happy Father’s Day’ peel off PVA glue or glue stick Deckled edged scissor Insert

Step 2: Using the paint brush and water, draw out an oblong on the mulberry paper to about half the size of the card and carefully tear along the water line. Leave to one side to dry.

Step 3:Using the deckled edged scissor cut the black sparkly paper into a slightly smaller oblong so that it fits on top of the red leaving a boarder around it of about ½ cm. Stick the black card onto the mulberry paper using either the PVA or glue stick. Then stick this centrally side to side and about 1 - 1 ½ cm from the top of the card.

Step 4: Stick the two playing cards face up on the black card with PVA or glue stick as in picture.

Step 5: Stick the peel off at the bottom of the card centrally.

Step 6: Make a paper insert and fix in with double sided tape. See Inserts in Hints and Tips.